Marine Heat Exchangers  (25)

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Tube bundle contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can eitherprovide the heat or absorb the heat required. Shell and tube heat exchangers are typically used for low-pressure or high-pressure applications.

Aalborg EH-U is a flow-through electrical heater unit, ideal for heating of engine jacket cooling water. The preheater’s heat load capacities range from 15 to 270 kW, with standard design values of 10 bar(g) and 95°C. The Aalborg EH-U is installed horizontally and comes as a complete unit with pre-mounted pump, control cabinet, safety valve and non-return valve, ready for installation.

Aalborg EH-U is a flow-through electrical heater unit, ideal for heating of engine jacket cooling water. The preheater’s heat load capacities range from 15 to 270 kW, with standard design values of 10 bar(g) and 95°C. The Aalborg EH-U is installed horizontally and comes as a complete unit with pre-mounted pump, control cabinet, safety valve and non-return valve, ready for installation.

Aalborg EH-U is a flow-through electrical heater unit, ideal for heating of engine jacket cooling water. The preheater’s heat load capacities range from 15 to 270 kW, with standard design values of 10 bar(g) and 95°C. The Aalborg EH-U is installed horizontally and comes as a complete unit with pre-mounted pump, control cabinet, safety valve and non-return valve, ready for installation.

Aalborg EH-U is a flow-through electrical heater unit, ideal for heating of engine jacket cooling water. The preheater’s heat load capacities range from 15 to 270 kW, with standard design values of 10 bar(g) and 95°C. The Aalborg EH-U is installed horizontally and comes as a complete unit with pre-mounted pump, control cabinet, safety valve and non-return valve, ready for installation.

Aalborg EH is a flow-through electrical heater, ideal for heating of oil or water. Its heat load capacities range from 3 to 367 kW, with design conditions up to 16 bar and 160°C. The standard Aalborg EH can be mounted both vertically and horizontally, but is also available as outflow suction heater or tank mounted immersion heater. The Aalborg EH heater is approved by all major marine classification societies, and is CE/PED approved

Aalborg EH is a flow-through electrical heater, ideal for heating of oil or water. Its heat load capacities range from 3 to 367 kW, with design conditions up to 16 bar and 160°C. The standard Aalborg EH can be mounted both vertically and horizontally, but is also available as outflow suction heater or tank mounted immersion heater. The Aalborg EH heater is approved by all major marine classification societies, and is CE/PED approved

Aalborg EH is a flow-through electrical heater, ideal for heating of oil or water. Its heat load capacities range from 3 to 367 kW, with design conditions up to 16 bar and 160°C. The standard Aalborg EH can be mounted both vertically and horizontally, but is also available as outflow suction heater or tank mounted immersion heater. The Aalborg EH heater is approved by all major marine classification societies, and is CE/PED approved

Aalborg EH is a flow-through electrical heater, ideal for heating of oil or water. Its heat load capacities range from 3 to 367 kW, with design conditions up to 16 bar and 160°C. The standard Aalborg EH can be mounted both vertically and horizontally, but is also available as outflow suction heater or tank mounted immersion heater. The Aalborg EH heater is approved by all major marine classification societies, and is CE/PED approved

Aalborg EH is a flow-through electrical heater, ideal for heating of oil or water. Its heat load capacities range from 3 to 367 kW, with design conditions up to 16 bar and 160°C. The standard Aalborg EH can be mounted both vertically and horizontally, but is also available as outflow suction heater or tank mounted immersion heater. The Aalborg EH heater is approved by all major marine classification societies, and is CE/PED approved

Aalborg EH is a flow-through electrical heater, ideal for heating of oil or water. Its heat load capacities range from 3 to 367 kW, with design conditions up to 16 bar and 160°C. The standard Aalborg EH can be mounted both vertically and horizontally, but is also available as outflow suction heater or tank mounted immersion heater. The Aalborg EH heater is approved by all major marine classification societies, and is CE/PED approved