Hempel Hempatex Enamel 56360 Drying Topcoat
Technical Specification
Features:
- Make: Hempel
- Model code: Hempatex Enamel 56360
- Volume solids: Standard - 32 ± 2; Aluminium - 31 ± 2 %
- VOC content: 602 g/lt
- Flash point: 41 °C
Additional info:
A physically drying topcoat based on acrylic resin and non-chlorinated plasticizer for optimum gloss and colour retention Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils Recommended as a finishing coat in Hempatex systems in moderately to severely corrosive environment For exterior and interior usage Glossy with good gloss and colour retention Markets and application : Marine/Marine seastock
Read more| Make | Hempel |
|---|---|
| Manufacturer | Hempel A/S |
| Category | Operation and maintenance>Coatings |
| Model code | Hempatex Enamel 56360 |
| Volume solids | Standard - 32 ± 2; Aluminium - 31 ± 2 % |
| VOC content | 602 g/lt |
| Flash point | 41 °C |
| Specific gravity | Standard - 1.1; Aluminium - 1 kg/L |
| Colour/ code | Standard - White 10000; Aluminium - Aluminium Grey 19002 |
| Finish/Sheen | Glossy |
| Film thickness | Dry - 35; Wet - 110 microns |
| Theoretical Coverage | 9.1 m²/litre |
| Additional info |
|
More Hempel Coatings
Featured white papers
Fleet planning as a strategic asset
Download