Swiss marine power company WinGD has completed shop tests of its groundbreaking variable compression ratio (VCR) technology.
The results confirm that methane reductions from new X-DF engines with VCR technology deliver similar ship greenhouse gas (GHG) emissions to high-pressure dual-fuel technologies, while delivering a total system cost and fuel cost advantage for several vessel applications.
Dual-fuel engines in maritime
The reduction is expected to be even greater for engines with a larger bore
The VCR shop test was completed at Mitsui E&S DU (MESDU) facilities in Japan, where the first X-DF2.0 engines with VCR are being built for bulk carriers owned by NYK Lines. The six-cylinder, 62-bore engine achieved around 30% fewer methane emissions than the same engine without VCR, taking total slip to around 0.83% of gas consumption.
This is less than half the EU (and provisional IMO) default slip attributed to low-pressure, low-speed dual-fuel engines in maritime regulations. The reduction is expected to be even greater for engines with a larger bore.
Overall GHG emissions
WinGD Vice President Product Centre, Peter Krähenbühl, said: “Over the past decade we’ve worked to ensure that the unmatched reliability and low capital expenditure of X-DF engines are supported by the lowest possible overall GHG emissions. The fuel consumption and methane slip reductions achieved by VCR bring us to that point."
"Low GHG emissions will be fundamental for shipowners as carbon pricing measures take effect, which is why we have already seen strong uptake, with well over 100 new X-DF engines ordered with VCR so far.”
CO2 equivalent emissions
The significant reduction in methane slip was achieved alongside a fuel reduction of up to 5.8%
The significant reduction in methane slip was achieved alongside a fuel reduction of up to 5.8% in gas mode and up to 6.9% in diesel mode.
The charts below show how those improvements affect the fuel cost and CO2 equivalent emissions compared to previous X-DF engine technologies and a high-pressure engine counterpart, for a typical car carrier operating profile.
New X-DF engines
VCR technology allows engine compression ratio to be adjusted automatically to optimise combustion based on engine load, fuel type and ambient conditions.
The solution can be applied to all new X-DF engines and a retrofit package has already been designed and installed on a pilot case vessel, yielding promising early results.
European and IMO regulations
WinGD is supporting the development of these mechanisms through various associations
Both European and IMO regulations will include mechanisms to update default methane slip factors and to allow shipping companies to supply their actual methane slip measurements - meaning that ship operators can reduce carbon costs based on any improvement in methane slip.
WinGD is supporting the development of these mechanisms through various associations that contribute to the regulatory process.
Recent updates to IMO’s NOx Technical Code
X-DF engines bring added certainty on fuel consumption and emissions thanks to their inherently low-NOx design and the long-established use of rational emission control strategies, as explicitly required in recent updates to IMO’s NOx Technical Code.
This means that WinGD does not need to adjust brake specific fuel consumption figures or tolerances to meet the new requirements.
Improve LNG engine platform
As previously stated, WinGD envisions a transitional pathway for LNG as a marine fuel, with fossil LNG steadily being replaced by zero or near-zero emissions variants from biomass and ultimately synthetic sources. Reducing methane emissions supports reduced GHG impact regardless of the source of LNG.
WinGD’s efforts to further improve its LNG engine platform come alongside its ammonia- and methanol-fuelled engines, ensuring that ship operators are able to choose the most cost-effective fuel to support their selected decarbonisation pathway.
