Motors News

Eneco has applied for the permit to construct the ‘Eneco Electrolyser’. This 800-MW green hydrogen plant will bring the target of 2.5 GW production of green hydrogen in 2030 in Rotterdam a massive step closer. Eneco Electrolyser The Eneco Electrolyser will use green energy from solar and wind farms to produce the hydrogen. With this hydrogen, which therefore uses no fossil fuel, the industry can make processes and products more sustainable. Currently, the largest European hydrogen...

Global provider of marine solutions, P&O Maritime Logistics (a DP World Company), is unwavering in its commitment to shaping a low-carbon future. Driven by innovation, the Company’s journey towards carbon neutrality showcases the power of collaboration and shared responsibility in a robust decarbonisation pathway. Capturing the essence of this pivotal journey, Benjamin Neal’s, Head of HSSEQ, latest whitepaper titled ‘Developing P&O Maritime Logistics’ Decarbonisa...

DNV and 14 partners have concluded phase 1 of the Emission Reduction (EMRED) Joint Industry Project (JIP), developing a monitoring and reporting framework to quantitively assess greenhouse emissions (GHG) from the offshore wind segment. In November, phase 2 of the project will entail testing the framework by including more offshore vessel types and gathering more data. Operational modes As the offshore industry is looking to decarbonise, DNV and partners including RWE, Vattenfall, &Oslas...

Investing in a sustainable value chain is a key opportunity for energy companies transitioning to a lower-carbon system. Additive manufacturing, a forefront in sustainable manufacturing, addresses challenges posed by traditional methods. Reports reveal inconsistencies in sustainability reporting among energy and oil and gas companies, compounded by a lack of supply chain indicators in reporting guidelines, hindering objective assessments. Sustainability of AM parts In phase 3, the aim has bee...

Brunvoll has received an order for the delivery of propulsion and manoeuvring packages for Windward's new Commissioning Service Operation Vessels (CSOVs). The order is for two vessels, with two additional vessels as an option.  Azimuth thrusters feature Windward’s new vessels will have two propulsion azimuth thrusters in the aft, and two retractable azimuth thrusters, and a tunnel thruster in the bow. All azimuth thrusters feature the latest and greatest improvements to meet the in...

Technology group Wärtsilä has introduced the marine sector’s first commercially available four-stroke engine-based solution for ammonia fuel. The new solution enables a significant advance in sustainable shipping operations–during a time in which ship owners are seeking viable options among green fuels. The ammonia solution is now commercially available as part of the Wärtsilä 25 engine platform, which was launched in September 2022. New ammonia solution Viridi...

Karstensens Skibsværft and Klondyke Fishing Company have chosen a broad equipment range from Brunvoll for the new fishing vessel “Chris Andra”. This is yet another contract between Brunvoll and Karstensen Skibsværft in the fishing vessel range, and delivery of the complete vessel will happen in 2026. The delivery to Karstensens Skibsværft includes several advanced Brunvoll products: the Integrated Costa Propulsion with controllable pitch propeller and gear, tunnel...

Wärtsilä ANCS, part of technology group - Wärtsilä, has delivered to Seaspan, a marine transportation and shipbuilding company, cutting-edge autonomous SmartDock capabilities to the seas. This delivery marks a significant step towards autonomous docking and undocking operations, making maritime activities safer and more efficient. The SmartDock system developed by Wärtsilä ANCS enables Seaspan to perform autonomous docking manoeuvres even in challenging conditions,...

Brunvoll, a global provider of propulsion and manoeuvring systems, has been selected to deliver a range of equipment for a new compact service vessel designed by Marin Design AS for Moen Marin for the aquaculture industry, including main propulsion, tunnel thrusters, and Brunvoll’s BruCon control system. The vessel is designed for high bollard pull, and the additional power will make the vessel more attractive in a demanding sector. New single-hull multi-purpose vessel The new compact s...

A multidisciplinary panel of maritime-industry representatives discussed the opportunities and challenges of artificial intelligence in shipping during the thought-provoking Opening Summit of Europort 2023. Exploring artificial intelligence in the maritime industry, the Opening Summit of Europort 2023 set the scene for a four-day event expected to welcome upwards of 25,000 visitors and more than 1,000 exhibitors from over 70 countries. Opening Summit’s panel discussion Proceedings began...

DNV, the independent energy expert and assurance provider, has successfully concluded Phase 1 of its joint industry project (JIP) aimed at establishing offshore substation standards for the growing floating wind sector. The collaborative industry effort has brought together 38 participating companies (including transmission operators, developers, component suppliers, Engineering, Procurement, Construction and Installation contractors, and yards) to tackle the distinctive challenges associated w...

Wärtsilä plans to further streamline its marine business portfolio by divesting its Gas Solutions business unit. Gas Solutions is a pioneering provider of gas processing systems. However, the business unit has limited synergies with the rest of Wärtsilä’s marine product portfolio. Therefore, Wärtsilä plans to move Gas Solutions to the Portfolio Business in preparation for a divestment. The net sales of Gas Solutions was EUR 293 million in the 12-month pe...

Båtbygg AS has placed an order with Teknotherm for a complete ammonia freezing system for Austral Fisheries’ new longline fishing vessel. The vessel is designed by Marin Teknikk AS for operation in the Antarctic Ocean, surrounded by some of the world’s harshest weather conditions. Teknotherm freezing system The newbuild no. 009 and named ‘Austral Odyssey’ will have a length of 70 metres The newbuild no. 009 and named ‘Austral Odyssey’ will have a len...

Accelleron has supported a turbocharger overhaul on the hospital ship - MV Africa Mercy, operated by the non-governmental organisation - Mercy Ships. The support, in the form of discounted labour, will enable the vessel to continue its mission of delivering free medical care and training to people without access to safe surgery, including in some of the world’s most vulnerable developing economies. The 43-year-old vessel, which houses five operating rooms and a recovery ward for more than...

Technology group - Wärtsilä has introduced a new ultra-low emissions version of its already efficient Wärtsilä 31DF engine. Whilst operating on LNG, this new version can further reduce methane emissions on a 50 percent load point by up to 56 percent and nitrogen oxide (NOx) by up to 86 percent. On a weighted average, this new technology can reduce methane emissions by 41 percent more than the standard Wärtsilä 31DF engine, which has already the lowest emission leve...

ABS shines a light on the maritime industry’s complex regulatory environment in a major new report summarising the latest global regulatory developments and guidelines, as well as their impact on the maritime industry. From reductions in the carbon intensity of shipping to the use of future fuels and autonomous ship capabilities, the IMO and regional regulators continue to pursue unified regulatory consensus to improve safety, efficiency and technological leadership in the maritime indust...

ABB and Carnival Corporation & plc have signed a long-term partnership agreement to collaborate on continued operational excellence and ship performance across the cruise company’s fleet using systematic maintenance planning, critical spare management, and cutting-edge digital solutions for condition monitoring. The contract was booked in Quarter 3 (Q3) 2023. Azipod® XO propulsion systems The 15-year agreement covers maintenance for Azipod® XO propulsion systems powering ves...

Mitsubishi Shipbuilding Co., Ltd., a Mitsubishi Heavy Industries (MHI) Group company based in Yokohama, Japan, has held a christening and launch ceremony for the FUGAKU MARU, a roll-on/roll-off (RO/RO) ship under construction for FUJITRANS Corporation. The ceremony took place at the Enoura Plant of MHI’s Shimonoseki Shipyard & Machinery Works in Yamaguchi Prefecture, Japan. The handover is scheduled for April 2024 following completion of outfitting work and sea trials. The new vessel...

An eye-catching new headquarters building in Southampton Docks has a familiar look to it-it is built entirely out of converted shipping containers more often seen on ships crossing the world’s oceans.  The new 3,500 square foot, two-storey depot terminal office for Solent Stevedores has been constructed by Southampton-based Willbox from 11 steel containers professionally converted to office use and then welded together. Construction of the new building The new building is designed...

Ahead of COP28, a new report gives industries a roadmap to save 11% of global emissions by 2030 while saving $437 billion along the way. The report, named ‘The Case for Industrial Energy Efficiency’ published by the Energy Efficiency Movement (EEM), outlines ten key actions that does not require new technologies or policy decisions, but promise to save emissions. The Case for Industrial Energy Efficiency in short: 10 mature, scalable energy efficiency key actions can deliver 4 g...

When Royal IHC, a pioneering Dutch supplier of vessels, equipment, and services for the maritime industry, sought to decarbonise its range of Beaver® cutter suction dredger (CSD) ships, it turned to WEG. Royal IHC’s step toward a more sustainable future was to develop an all-new fleet of electrically powered Beaver CSD vessels. But to power them, it needed a high-performance electric motor that suited the Beaver’s technical specifications. Royal IHC chose WEG’s WGM20...

Technology group - Wärtsilä has signed a strategic partnership agreement for Decarbonisation Modelling with Raízen, a major Brazilian energy company. The agreement focuses on both new building and existing operation upgrade plans. Its aim is to build and implement a fleet-wide decarbonisation plan with a particular interest in the future marine introduction of ethanol as a marine fuel. Wärtsilä brings new sustainable solutions to the market Wärtsilä, under...

The Chief Executive Officer (CEO) and President of Wilhelmsen, Carl Schou, believes there are great opportunities for ship managers ahead. In an interview with Naftemporiki, one of Greece business news publication, Carl Schou discusses the significant challenges faced by the maritime industry today. Question: What exactly is the role and responsibilities of a third-party management company when taking over a shipowner's fleet? Carl Schou answered, “When a third-party management company t...

MAN Energy Solutions and Energy Dome, an LDES solution provider based in Milan (Italy), have entered into a Memorandum of Understanding (MoU) for a non-exclusive collaboration. Both companies are committed to exploring the potential of integrating their individual technologies and competencies to further optimise Energy Dome’s CO2 Battery Technology, a pioneering long-duration energy storage system addressing the increased need for energy storage solutions worldwide. Long-duration energy...

Nexans Marine Operations AS has returned to Ulstein Verft AS to build a new and updated version of the DP3 cable laying vessel MS “Nexans Aurora”. The new vessel will share the same comprehensive propulsion and manoeuvring package from Brunvoll. Brunvoll’s delivery for the new cable-laying vessel will share the same specifications as the previous delivery, consisting of three azimuth propulsion units, two tunnel thrusters, and a retractable azimuth thruster. All the thrus...

VARD, one of the major global designers and shipbuilders of specialised vessels, has ordered 4 × MAN 12V175D-MEM GenSets in connection with the building of a new purpose-built, cable-laying vessel (CLV) for NCT Offshore, the Danish subsea specialist. The GenSets will form part of the vessel’s diesel-electric DP2 propulsion system, which also includes a hybrid battery package. VARD orders 4 × MAN 12V175D-MEM GenSets This exciting project is just the latest in the rapidly-grow...

Swiss marine power company - WinGD will deliver ammonia-fuelled X‑DF‑A engines for a series of two 46,000m3 LPG/ammonia carriers to be built for EXMAR LPG BV, a joint venture of EXMAR and Seapeak, at Hyundai Mipo Dockyard. The two 52-bore X52DF‑A engines will be delivered in Q2 2025 and will be among the first of WinGD’s ammonia-fuelled engines to enter service. The order represents WinGD’s entry into an emerging market for ammonia-fuelled gas carriers. Such vessels have traditional...

The Board of Directors of Wallem Group today announced that John-Kaare Aune will be stepping aside as Wallem Group’s CEO and after a period of transition will leave in January 2024. Having joined Wallem in 2019 as Managing Director, Shipmanagement, John-Kaare Aune was appointed as Group CEO in January 2021. Nigel Hill, Wallem Group Chairman, said, "On behalf of the Wallem Board, I would like to thank John for his leadership and dedication over the past three years as CEO. We are grateful...

DNV has published new guidelines for the safe installation of onboard carbon capture and storage (OCCS) systems on board ships, amid growing pressure on the shipping industry to develop effective technologies to reduce emissions as part of the ongoing maritime energy transition. Different methods for reducing greenhouse gas (GHG) emissions will be necessary to achieve international, regional, and national emissions targets. Post-combustion OCCS on board trading ships is expected to be among the...

As part of its effort to expand its presence in the East African markets, WEG is taking significant steps to increase its presence in Uganda through a partnership with Petrok as a Value Added Reseller (VAR). Petrok's local presence and technical expertise, along with the reliability of WEG products in the market, will facilitate this expansion. Strengthening position in Uganda The expected economic growth from projects like as the East African Crude Oil Pipeline (EACOP), along with the exis...